You can add accounts from a Ledger hardware wallet to the Phantom browser extension using USB. This works when setting up Phantom for the first time or adding Ledger accounts to an existing Phantom wallet.

Phantom supports Ledger hardware wallets on the browser extension. For a full list of supported hardware wallets, see Supported hardware wallets in Phantom.

Before you start #

Complete these steps before connecting your Ledger to Phantom:

• Install or update the Solana, Ethereum, and Bitcoin apps on your Ledger. The Ethereum app covers EVM-compatible chains.
• Update your Ledger device firmware.
• Close Ledger Live before connecting or signing in Phantom. Ledger Live can block the browser connection.
• Use a USB cable that supports data transfer, not a charge-only cable.

Some transactions may require blind signing. Enable it only for the Ledger apps you plan to use:

• Solana: Open the Solana app on your Ledger → Settings → Blind signing → Enable blind signing → set to Enabled.
• Ethereum: Open the Ethereum app on your Ledger → Settings → Blind signing → Enable transaction blind signing → set to Enabled.

Connect your Ledger #

From the welcome screen #

1. Connect your Ledger via USB and unlock it.
2. Click the Phantom browser extension icon.
3. In a new tab that opens, click Create a New Wallet, then Connect Hardware Wallet.
4. Follow the steps in Complete the connection.

From inside Phantom #

1. Connect your Ledger via USB and unlock it.
2. Open the Phantom browser extension.
3. Click your profile avatar in the upper left.
4. Click Add Account (the plus icon).
5. Click Connect Hardware Wallet.
6. Follow the steps in Complete the connection.

Complete the connection #

1. Phantom detects your Ledger device. In a new tab that opens, click Connect.
2. Select your Ledger device, click Connect, then click Continue.
3. Select a network, such as Solana, then open the matching app on your Ledger when prompted.
4. Repeat the connection steps for each network you want to use with your Ledger.
5. Return to Phantom to view your connected Ledger accounts.

After your Ledger accounts are connected, they appear in Phantom. You still need your Ledger device to sign transactions.

Sign a transaction #

Make sure Ledger Live is closed before signing transactions in Phantom.

1. Open the Phantom browser extension.
2. Prepare a transaction—for example, start sending a token.
3. Connect your Ledger via USB and unlock it.
4. Open the correct app on your Ledger, such as Solana.
5. Submit the transaction in Phantom.
6. Confirm the transaction on your Ledger when prompted.

After you approve the transaction on your Ledger, Phantom submits it to the network.

Common issues #

Connection issues #

If Phantom does not detect your Ledger, try these steps:

1. Close your browser completely and reopen it.
2. Make sure Ledger Live is closed.
3. Make sure your Ledger is unlocked and connected with a data-capable USB cable.
4. Update your Ledger device firmware.
5. Update the Solana, Ethereum, or Bitcoin app on your Ledger.
6. Try connecting again.

If the issue persists, remove your Ledger and connect it to Phantom again.

Transaction issues #

If your Ledger connects but transactions fail, try these steps:

1. Make sure your Ledger is connected via USB and unlocked.
2. Open the correct app on your Ledger, such as Solana.
3. Make sure Ledger Live is closed.
4. Enable blind signing for the relevant Ledger app, then try the transaction again.

If the issue persists, see Ledger's guide for more troubleshooting: Set up and use Phantom to access your Ledger Solana (SOL) account.